Back SampleSaver™ Racks
 

The SampleSaver™ Portable Storage Container system is a specialized container that enables a user to replace the reactive atmospheric air typically present in the container with an inert gas species. Once a sample is stored inside the inert atmosphere, the sample does not undergo reactions such as oxidation during storage and/or transportation. It is ideally suited to the preservation of microscopy samples that may undergo changes during the delay between sample preparation and analysis. The storage container can be evacuated and backfilled or purged with an inert gas. Gas can be supplied by connecting it directly to an inert gas cylinder or dry nitrogen can be boiled off of liquid nitrogen and pumped into the storage container using the Thing-A-Ma-Jug™ Cryogen Gas Supply.
Sample specific racks are available for the SampleSaver™ Portable Storage Containers as individual units or in discounted combination packages with the SS100 or SS200 containers.

Back to SampleSaver™ Main Page
Input quantity and click submit below
   
SampleSaver™ Portable Storage Container - SS100 Sample Racks      
Accessories - (Please add one of the following to complete your SampleSaver™)    
SS100-FIB SS100-FIB FIB Sample Rack to store SBT Fortress™ Holders (Fortress™ holders are not included). This rack can hold any samples with a 1/8" diameter pin. That would include SEM Mounts, Fortress™ FIB Holders, Tripod Polisher®, SEM stubs etc. They are securely held in place with a set screw. The SS100-FIB rack consists of 2 tiers and each tier can hold 5 samples. Total sample capacity is 10 samples. 275.00 Qty.
SS100TEM Grid Box Holder SS100-TEM Grid Box Holder
Consists of 3 vented TEM grid boxes and storage rack to fit into SampleSaver™ Portable Storage Container. Each TEM Grid box holds 50 samples for a total storage capacity of 150 samples.
245.00 Qty.
SS100-125 SEM Stub Holder SS100-125 1/8” SEM Stub Holder 
1/8” pin for a total sample capacity of 15 samples.
(SEM stubs not included)
195.00 Qty.
SS100-375 SEM Stub Holder SS100-375 3/8” SEM Stub Holder
Consists of 3 tier sample rack. Each shelf holds 3 SEM stubs with 3/8” pin for a total sample capacity of 9 samples. (SEM stubs not included)
195.00 Qty.
SS100-1250-125  Combo Stub Holder

SS100-1250-125

2 x 1-1/4" and 1 x 1/8" combination SEM Stub Holder Consists of 3 tier sample rack. Bottom and middle shelves can hold either a single sample with a 1/8" pin and a sample size up to 1.25" or a metallographic mount up to 1.25" diameter. The top shelf holds 5 SEM stubs with 1/8" pin for a total sample capacity of 7 samples. (SEM stubs not included) 195.00 Qty.
SS100-1250-250  SEM Stub Holder

SS100-1250-250

1 x 1-1/4" and 2 x 1/8" combination SEM Stub Holder Consists of 3 tier sample rack. Bottom shelf can hold either a single sample with a 1/8" pin and a sample size up to 1.25" or a metallographic mount up to 1.25" diameter. Top two shelves each hold 5 SEM stubs with 1/8" pin for a total sample capacity of 11 samples. (SEM stubs not included) 195.00 Qty.
SS100-1000-125  SEM Stub Holder SS100-1000-125

2 x 1” and 1 x 1/8” combination SEM Stub Holder
Consists of 3 tier sample rack. Bottom and middle shelves can hold either a single sample with a 1/8” pin and a sample size up to 1.00” or a metallographic mount up to 1.00” diameter.  The top shelf holds 5 SEM stubs with 1/8” pin for a total sample capacity of 11 samples. (SEM stubs not included)

195.00 Qty.
SS100-1000-250 SEM Stub Holder SS100-1000-250 1 x 1" and 2 x 1/8" combination SEM Stub Holder Consists of 3 tier sample rack. Bottom shelf can hold either a single sample with a 1/8" pin and a sample size up to 1.25" or a metallographic mount up to 1.00" diameter. Top two shelves each hold 5 SEM stubs with 1/8" pin for a total sample capacity of 11 samples. (SEM stubs not included) 195.00 Qty.
HIT-M4 HIT-M4 Adapter pin that will allow a Hitachi SEM specimen mount having a base with an M4 female thread to be held in a rack that uses 1/8" pins. The adapter pin is 12 mm (0.472") high. 5/Pkg 45.00 Qty.
SS100-1250-375 SEM Stub Holder

SS100-1250-375

2 x 1-1/4" and 1 x 3/8" Combination SEM Stub Holder Consists of 3 tier sample rack. Bottom and middle shelves can hold either a single 1/8" sample mount and a sample size up to 1.25" or a metallographic mount up to 1.25" diameter. Top shelf holds 3 SEM stubs with 3/8" pin for a total sample capacity of 7 samples. (SEM stubs not included) 195.00 Qty.
SS100-1250-375H  Combination Holder SS100-1250-375H 2 x 1-1/4" and 1 x 3/8" Combination Holder This holder has been modified from SS100-1250-375. The middle tier height has been increased to accommodate a sensor and the grommets in the 3/8" top tier have been removed. 270.00 Qty.
SS100-1250-750 SEM Stub Holder

SS100-1250-750

1 x 1-1/4" and 2 x 3/8" Combination SEM Stub Holder Consists of 3 tier sample rack. Bottom shelf can hold either a single 1/8" sample mount and a sample size up to 1.25" or a metallographic mount up to 1.25" diameter. Top two shelves each hold 3 SEM stubs with 3/8" pin for a total sample capacity of 7 samples. (SEM stubs not included) 195.00 Qty.
SS100-1000-375  SEM Stub Holder SS100-1000-375 2 x 1" and 1 x 3/8" Combination SEM Stub Holder Consists of 3 tier sample rack. Bottom and middle shelves can hold either a single 1/8" sample mount and a sample size up to 1.25" or a metallographic mount up to 1.00" diameter. Top shelf holds 3 SEM stubs with 3/8" pin for a total sample capacity of 7 samples. (SEM stubs not included) 195.00 Qty.
SS100-1000-750  SEM Stub Holder SS100-1000-750 1 x 1" and 2 x 3/8" combination SEM Stub Holder Consists of 3 tier sample rack. Bottom shelf can hold either a single 1/8" sample mount and a sample size up to 1.25" or a metallographic mount up to 1.00" diameter. Top two shelves each hold 3 SEM stubs with 3/8" pin for a total sample capacity of 7 samples. (SEM stubs not included 195.00 Qty.
SS100-AFM-M Specimen Disc Holder SS100- AFM-M 12mm and 15mm Diameter AFM Specimen Disc Holder Consists of 3 tier sample rack. Each shelf holds 3 magnetic AFM sample plates using magnets for a total sample capacity of 9 samples. (AFM Holders not included). 295.00 Qty.
SS100-AFM-B12  AFM Storage Box Holder SS100-AFM-B12 AFM Storage Box Holder - 12mm Consists of 3 vented AFM storage boxes and storage rack. Each AFM storage box holds 10 12mm discs for a total storage capacity of 30 samples. 245.00 Qty.
SS100-AFM-B15  AFM Storage Box Holder SS100-AFM-B15 AFM Storage Box Holder - 15mm Consists of 3 vented AFM storage boxes and rack. Each AFM storage box holds 8 15mm discs for a total storage capacity of 24 samples. 245.00 Qty.
   
 
Input quantity and click submit at bottom
SampleSaverT Portable Storage Container SS200 Sample Racks  
Price Enter
Qty.
Accessories - (Please add one of the following to complete your SampleSaverT)    
SS200-FIB-06  Sample Holder SS200-FIB-06 Sample Holder to store SBT Fortress™ Holders(Fortress™ holders are not included). This rack can hold any samples with a 1/8" diameter pin. That would include SEM Mounts, Fortress™ FIB Holders, Tripod Polisher® SEM stubs etc. They are securely held in place with a set screw. The SS200-FIB-06 rack consists of 1 tier and each tier can hold 6 samples. Total sample capacity is 6 samples. This rack unit can be expanded to include 4 additional tiers with the addition of SS200-FIB-T tiers. 200.00 Qty.
SS200-FIB-30  Sample Holder SS200-FIB-30 Sample Holder to store SBT Fortress™ Holders (Fortress™ holders are not included). This rack can hold any samples with a 1/8" diameter pin. That would include SEM Mounts, Fortress™ FIB Holders, Tripod Polisher® SEM stubs etc. They are securely held in place with a set screw. The SS200-FIB-5 rack consists of 5 tiers and each tier can hold 6 samples. Total sample capacity is 30 samples. 395.00 Qty.
SS200FIB_T  One tier SS200-FIB-T One tier for SS200-FIB-06, SS2FIB-06F, or SS2FIB-06M. (No holders included.) 100.00 Qty.
SS200-AMP Insert Rack SS200-AMP The SS200-AMP is an insert rack for the SS200 That will hold up to ten ampoules for analysis standards. They are securely held in place with captured rubber grommets. 205.00 Qty.
SS200-Vial  Insert Rack SS200-VIAL The SS200-VIAL is an insert rack for the SS200 that will hold up to twelve vials for samples and analysis standards. They are securely held in place with captured rubber grommets. 255.00 Qty.
 
Back to Top
South Bay Technology, Inc. ©2012